SikaBit® Pro P -40-5 MG

SikaBit® PRO P-40-0 MG

PLASTOMERIC MODIFIED BITUMINOUS WATERPROOFING MEMBRANE

DESCRIPTION

SikaBit® PRO P-40-0 MG is an APP modified, bitumin-
ous, torch-applied, waterproofing membrane. It is re-
inforced with a dimensionally stable non-woven poly-
ester inlay. The underside has a thin polyethylene

burn-off film for easy application. It can be applied to
wood, metal and concrete substrates including over

existing bitumen roofing membranes. Top surface fin-
ish: mineral granules. Thickness: ~4,0 mm

USES
Waterproofing membrane for:
▪ Retaining walls and basements
▪ Flat roofs under protective layers or ballast
▪ Balconies and terraces under tiles
▪ Wet rooms
▪ Underground car parks
▪ Raft slabs
▪ As a top sheet in a double layer roofing system
Protection of various substrates in a wide range of
applications
▪

CHARACTERISTICS / ADVANTAGES
▪ Good watertightness
▪ Good elongation and cold flexibility
▪ Good mechanical properties (tensile, tear, shear)
▪ Good resistance to impact
▪ Easy to install by torching method

Choice of primers to suit substrate and weather con-
ditions

▪

PRODUCT INFORMATION
Composition APP modified bitumen
Reinforcing Material Non-woven polyester fabric
Packaging Roll size

Length 10,00 m
Width 1,00 m
Appearance / Colour Top surface Mineral granules
Backing Polyethylene film

Shelf life 12 months from date of production

Product must be stored in original unopened and undamaged sealed pack-
aging in dry conditions and temperatures between +5 °C and +35 °C. Store

Storage conditions

1 / 4

in a vertical position. Do not stack pallets of the rolls on top of each other,
or under pallets of any other materials during transport or storage. Always
refer to packaging.

Length 10 m
Width 1 m
Effective Thickness 4,0 mm ± 5 % (EN 1849-1)
TECHNICAL INFORMATION
Resistance to Impact ≥ 600 mm at +23 °C (EN 12691- Method A)
Tensile Strength Longitudinal 600 N/50 mm ± 20 %
Transversal 400 N/50 mm ± 20 %

(EN12311-1)

Elongation Longitudinal 30 % ± 15 %
Transversal 30 % ± 15 %

(EN12311-1)

Tear Strength Longitudinal 150 N ± 30 %
Transversal 150 N ± 30 %

(EN 12310-1)

Joint Shear Resistance Longitudinal Min. 500 N/50mm
Transversal Min. 350 N/50mm

(EN 12317-1)
Flow Resistance ≥ 120 °C (EN 1110)
Watertightness 60 kPa (EN 1928-Method B)
APPLICATION INFORMATION
Ambient Air Temperature +5 °C min. / +50 °C max.
Relative Air Humidity 80 % max
Substrate Temperature +5 °C min. / +50 °C max.